As biomass fuels become more and more popular, wood pellet machines have attracted more and more attention. Then, what problems should be paid attention to in the use of the newly purchased biomass wood pellet machine? The new machine is different from the old machine that has been working for a period of time. Just use it and need to pay attention to three points. The wood pellet machine reminds you to pay attention to the following Three points:
1. Grinding of wood pellet machine equipment. Since the newly purchased wood pellet machine has just left the factory, it has only undergone simple debugging. The manufacturer only ensures that the material can be discharged normally. After the user gets the wood pellet machine, it needs to be run-in (in fact, any machine There is a running-in period), it is particularly important for the wood pellet machine to grind reasonably before it is officially used. This is because the ring die roller of the wood pellet machine is a heat-treated part. During the heat treatment process, the inner hole of the ring die has Some burrs, these burrs will hinder the flow and forming of the material during the operation of the wood pellet machine, so the user should strictly follow the instructions in the wood pellet machine operation manual for reasonable grinding.

2. Smoothing and cooling process. The pressing roller of the biomass wood pellet machine is responsible for extruding the wood chips and other materials into the inner hole of the mold, and pushing the raw materials on the opposite side to the front raw materials. In this process, the pressure of the wood pellet machine The roller directly affects the forming of the pellets. When the sawdust pellet machine is in normal operation, the working temperature of the sawdust pellet machine equipment pressing bar is extremely high. What we need to do at this time is to supply oil in a timely and reasonable manner to ensure that the sawdust pellet machine components are in good contact with each other. Lubrication and effective heat dissipation measures can prolong the service life of the wood pellet machine press wheel, so as to ensure the stability of the output of the wood pellet machine.

3. The newly purchased wood pellet machine does not add too much raw materials. Generally speaking, the output of new pellets is lower than the rated output. For example, a wood pellet machine with a rated output of 1T/h is depressed for an hour at the beginning. It can only produce 900 kilograms, but after passing the running-in period in the future, the output will reach its own rated output. Users should not be too impatient when the new wood pellet machine is put into production, and feed less.

In general, the new wood pellet machine equipment requires more maintenance. The wood pellet machine itself has a high working intensity and a relatively high load. Users need to track and monitor the entire production process, such as current, voltage, sound, dust, particles. In other cases, in the future, in the face of the failure of the wood pellet machine, it can be targeted, and the faulty wearing parts can be replaced very quickly in time to ensure the service life of the wood pellet machine.